Star Micronics MG S-8200 Scales Setup on Android
Overview
Star Micronics MG S-8200 Scales connect to your Android devices via Bluetooth and allow you to scale your products quickly and efficiently, and see the weights both on the scales and in the POS app.
Connecting the scales
1. Power on the scales. The light at the back of the scales is supposed to be green (which means they are ready to pair).
2. Turn on Bluetooth on your Android device Settings, wait for it to find the scales (MG-xxxxxxxx) device and then select it to pair.
3. Open POS app.
4. Go to Settings > Weight Scales setup > Search for scales. The scales will be detected, and at this point the system will ask you to allow detecting device's location. It should be enabled for proper performance.
5. Click on the scales name > Connect. Once the scales are connected, the green light on the scales turns into blue.
Now you can scale your items to test the device.
Please note that the units of measurement on the scales an in the POS need to be the same (gram/pound/ounce). The units of measurement in the BO can be set up for every product in Pricing tab or in Unit column while importing inventory.
To change the units of measurement on the scales please see the instruction here: https://www.starmicronics.com/help-center/knowledge-base/how-to-change-weight-measuring-unit-on-scale/
4. Go to Settings > Weight Scales setup > Search for scales. The scales will be detected, and at this point the system will ask you to allow detecting device's location. It should be enabled for proper performance.
5. Click on the scales name > Connect. Once the scales are connected, the green light on the scales turns into blue.
Now you can scale your items to test the device.
Please note that the units of measurement on the scales an in the POS need to be the same (gram/pound/ounce). The units of measurement in the BO can be set up for every product in Pricing tab or in Unit column while importing inventory.
To change the units of measurement on the scales please see the instruction here: https://www.starmicronics.com/help-center/knowledge-base/how-to-change-weight-measuring-unit-on-scale/
Related Articles
Star Micronics MG S-8200 Scales Setup on Android
Overview Star Micronics MG S-8200 Scales connect to your Android devices via Bluetooth. They allow you to weigh your products quickly and efficiently, and see the weights both on the scales, and in the POS app, while automatically updating the ...Star Micronics MG S-8200 Scales Setup on Poynt C
Overview Star Micronics MG S-8200 Scales connect to your Poynt C device via Bluetooth. They allow you to weigh your products quickly and efficiently, and see the weights both on the scales, and in the POS app, while automatically updating the product ...Star Bluetooth TSP100Bi Printer Setup on Android
Overview Before you can use the Star Bluetooth TSP100 Printer on your Android device, you will have to configure it and set it up with eHopper. Connecting Star Bluetooth TSP650II to Android 1. Switch printer on by pressing the on switch. 2. Open ...Star TSP100 LAN Printer Setup on Android
Overview Before you can use the Star TSPP100 Printer on your Android device, you will have to configure it and set it up with eHopper. Connecting Star TSP100 LAN Printer to Android 1. On the back of the printer, input the printer power source ...Star SP700 Impact Printer Setup on Android
Overview Star SP700 is an impact (non-thermal) printer. It requires 76mm non-thermal paper roll. It is highly recommended to utilize SP700 as kitchen printer, as it is splash and heat resistant; also the printer makes sound notification when printing ...