Overview

Before you can use the Star Bluetooth TSP100 Printer on your Android device, you will have to configure it and set it up with eHopper. 

Connecting Star Bluetooth TSP650II to Android

1. Switch printer on by pressing the on switch.

2. Open Bluetooth Settings on tablet.

3. Press on the Pair button on the back panel of the printer for about 10 seconds until the green indicator begins to blink.

4. Scan for Bluetooth devices in tablet settings.

5. Select to pair tablet with Star Bluetooth TSP100.

Setting up Star Bluetooth TSP100 on POS

1. Log in to POS.

2. In the left navigation menu, tap on Settings--->Printer Setup

3. On Printer Settings screen, tap Search for printer on the top right. 

4.  The Star Bluetooth TSP100 printer should show up under both Receipt Printers and Kitchen Printers. Check off the box(es) of whichever one(s) you would like to set up your printer to print.

Note: For kitchen receipts to print, you must select the Kitchen Receipt option in the Receipt tab of your Back Office Store Settings. 

• For info on setting up directional printing for your kitchen printers, please see https://desk.zoho.com/portal/ehopper/en/kb/articles/directional-printing-for-kitchen-printers

5. Choose either 80mm or 58mm as the paper width for both printer types.

6. The option Print Test Page will appear to the right of the printer. Tap it to print a test page to ensure that the printer is set up properly.

7. Confirm your printer settings by tapping the DONE button. The printer should now be set up to work on your tablet.