Setting Up Label Printer StarM mC-Print3 with POS

Setting Up Label Printer StarM mC-Print3 with POS

Overview

The supported model is StarM mC-Print3 MCL32CBI (part number 39658310).
  • Multimedia: Prints on linerless label (permanent & sticky), die-cut label, continuous label, thermal receipt
  • One Touch Label stores pre-made receipts & labels for easy printing
  • Supports any paper width 25mm – 80mm
  • Multiple connectivity options for Android & Windows
  • Effortless, no-tools-required repairs with minimal upkeep

Supported Paper

The supported paper is Continuous Labels for mC-Label 
Paper Width: 40mm, 58mm, 80mm

Connecting StarM mC-Print3 to Android tablet

  1. Make sure the tablet and the printer are both connected to the same network. 
  2. Go to POS->Printers->Search For Printer


Installing drivers and connecting to the POS on the Windows device:

  1. Navigate to https://starmicronics.com/support/products/mc-print3-support-page/?srsltid=AfmBOoohhNsu9QFDPpx36DGUpe2uLKcApB6KMExYJOdGL593zDiyLw5Q
  2. Download Star Windows Software Full

3. UnZip downloaded file

3.1 Run StarWindowsSoftware and complete the installation.

  1. In Windows Search, found and run Printer Utility

  1. Select the printer model and follow the steps

    Choose Ethernet and press Search Network. If the printer connected correctly the IP Address will appear automatically.

  2. Go to POS->Printers->Search For Printer

Warning
Labels are printed one at a time. The printer will wait for the current label to be removed before printing the next one.

    • Related Articles

    • Internal Printer Setup on All-in-One Device

      Connecting Internal Printer to Device 1. Scan for Bluetooth devices in the tablet Settings. 2. Select to pair tablet with the internal printer.    Setting up Internal Printer on POS 1. Log in to POS. 2. In the left navigation menu, tap ...

    • All-In-One POS Device with Customer Facing Display

      Includes: Fully Compatible with eHopper POS Software Anbdroid 9.0 OS Display 15.6″+15.6″ Main screen: 15.6″ FHD, 1920×1080 Vice screen: 15.6″ FHD, 1920×1080 G+G capacitive multi-touchscreen Kryo-260 Octa-core up to 2.2GHz 3-4 GB RAM External ports: ...

    • Star TSP100 LAN Printer Setup on eHopper POS

      Overview Once it is set up, you can use the Star TSP100 LAN Printer with eHopper on Android, iPad, Windows, and Poynt devices.  Connecting Star TSP100 LAN Printer to Tablet 1. On the back of the printer, input the printer power source cord into the ...

    • Receipt and Kitchen Printer Setup on Poynt

      Overview For a Receipt Printer or Kitchen Receipt Printer, you can use either the built-in Poynt printer, the Star TSP 100 LAN Printer, or a BTP-R180II printer. Requirements Must have at least reedom Package Must have selected Poynt from Payment ...

    • Setting Up Printers on POS

      Overview You can use receipt/kitchen printers with Android, Windows, and Poynt devices when working in eHopper. Setting Up Printers On Windows Devices Prerequisites 1. You must have already installed your printer's driver. To do this, please follow ...