How to fix issues with Cash Drawer connection on Windows POS app after upgrading?

How to fix issues with Cash Drawer connection on Windows POS app after upgrading?

If you experience an issue with your Cash Drawer connection after updating your Windows POS app, please set it up again using steps below:

  • On your Windows POS app, go to 'Settings'.
  • Select 'Cash Drawer'.
  • In the list of cash drawers, select the cash drawer model you are using.
  • Select the сash drawer that the selected cash drawer is connected to from the drop down list*.

  • Hit "Test".
  • Confirm opening of the cash drawer in modal window.
  • If it was not opened, try selecting another Cash Drawer model.

  • Select the "Done" button to save cash drawer settings.



    • Related Articles

    • Cash Drawer Troubleshooting

      Overview If your cash drawer is not opening, follow the troubleshooting steps below (depending on if drawer is connected to Ethernet printer or Bluetooth printer).   Troubleshooting for Drawer Connected to Ethernet Printer Make sure your receipt ...

    • Receipt Printer Troubleshooting on Windows PC

      If you are using a supported eHopper printer and your receipt printer stops printing, please follow the below steps for troubleshooting.  1. Hold the Feed button on the printer. If nothing prints, that means their either is a paper jam or no paper in ...

    • eHopper Cash Drawer Setup

      Overview This article provides instructions of how to connect the eHopper cash drawer to a printer and how to set it up in POS.   Requirements If using the BTP-R180II printer, it should be turned on and set up with eHopper. If using built-in Poynt ...

    • APG Vasario Cash Drawer Setup on Android

      Overview Before you can use the APG Vasario Cash Drawer on your Android device, you will have to connect it to your printer and set it up on eHopper.    Requirements Printer must be turned on and properly set up.   Connecting APG Vasario Cash Drawer  ...

    • eHopper Cash Drawer Setup on Android

      Connect eHopper Cash Drawer to Printer 1. Once your eHopper BTP-R180II Printer is set up, input the cash drawer's RJ12 connector to the back of the printer, above where it says "Cash Drawer."  2. Cash drawer is ready to operate.    Set Up eHopper ...