Cash Drawer Setup on Poynt

Cash Drawer Setup on Poynt

Overview

  • You can set up the cash drawer on your Poynt device by connecting the drawer to a BTP-R180II or Star TSP100 LAN printer.

 

Requirements

1. Must have Freedom account.

2. Must have selected Poynt from Payment Gateway drop-down menu in Register Settings of Back Office. 

3. If connecting drawer to BTP-R180II printer, the printer must be turned on and properly set up in eHopper. If connecting drawer to Poynt's built-in printer, select the printer in eHopper POS Printer Settings. 

4. The Poynt power cord should be inputted to the right-most plug-in on the Poynt dock.

5. The Poynt device should be placed on the dpck and turned on.

 

Connecting eHopper Cash Drawer to BTP-R180II Printer

1. Connect cash drawer to BTP-R180II printer via RJ12 connector.

2. The cash drawer is ready to operate.

 

Connecting APG Vasario Cash Drawer to Star TSP100 LAN Printer

1. Connect cash drawer to Star TSP100 LAN printer via RJ12 connector.

2. The cash drawer is ready to operate.

 

Connecting MS Cash Drawer to Star TSP100 LAN Printer 

1. Connect cash drawer to Star TSP100 LAN printer via RJ12 connector.

2. The cash drawer is ready to operate.

 

Setting Up Cash Drawer on POS

1. Log in to eHopper POS

2. In the left navigation menu, tap on Settings--->Cash Drawer

3. Tap Search for cash drawer.

4. In the list that appears select the printer you are using. 

5. Tap Test link to the right of the selected printer. If drawer opens, it is properly set up. 

6. Confirm cash drawer settings by tapping DONE.

7. Cash drawer is ready for usage in application.


    • Related Articles

    • eHopper Cash Drawer Setup

      Overview This article provides instructions of how to connect the eHopper cash drawer to a printer and how to set it up in POS.   Requirements If using the BTP-R180II printer, it should be turned on and set up with eHopper. If using built-in Poynt ...

    • APG Vasario Cash Drawer Setup on Poynt Smart Terminal

      Overview To set up the APG Vasario Cash Drawer on your Poynt device, you can either input a USB Cash Drawer trigger, connecting the device to the drawer (if using built-in Poynt printer), or connect the drawer to a Star TSP100 LAN printer.   ...

    • eHopper Cash Drawer Setup on Poynt Smart Terminal

      Overview To set up the eHopper Cash Drawer on your Poynt device you can connect the drawer to a BTP-R180II printer.   Requirements 1. Must have Freedom account. 2. Must have selected Poynt from Payment Gateway drop-down menu in Store Settings of Back ...

    • APG Vasario Cash Drawer Setup

      Overview Before you can use the APG Vasario Cash Drawer, you will have to connect it to your printer and set it up on eHopper.    Requirements If using a Star printer, it should be turned on and set up with eHopper. If using built-in Poynt printer ...

    • Cash Drawer Troubleshooting

      Overview If your cash drawer is not opening, follow the troubleshooting steps below (depending on if drawer is connected to Ethernet printer or Bluetooth printer).   Troubleshooting for Drawer Connected to Ethernet Printer Make sure your receipt ...